|
| WS-C2960S-48TS-L Switch 48GE + 4GB SFP, Flexstack Switch |
|
|
|
|
 |
|
Specifications
Product Description Cisco Catalyst 2960S-48TS-L - switch - 48 ports
Device Type Switch - Managed
Form Factor Rack-mountable - 1U
Dimensions (WxDxH) 17.5 in x 11.8 in x 1.8 in
Weight 10.6 lbs
RAM 128 MB
Flash Memory 64 MB
Ports Qty 48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Data Transfer Rate 1 Gbps
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Empty Slots 4 x SFP (mini-GBIC)
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9,
Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, FTP, TFTP, SSH
Communication Mode Half-duplex, full-duplex
Features Layer 2 switching, dynamic IP address assignment , DHCP support,
auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support,
auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support,
Broadcast Storm Control, IPv6 support, High Availability, Multicast Storm
Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support,
Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking
Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File
Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of
Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI),
Per-VLAN Spanning Tree Plus (PVST+)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE
802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE
802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Power AC 120/230 V ( 50/60 Hz )
Manufacturer Warranty Limited lifetime warranty
Maximum order Qty: 10
 |
 |
 |
| YOU MAY NEED FOLLOWING PHONES FOR THE CISCO SWITCHES - GLC-FE-100FX
GLC-GE-100FX
GLC-LH-SM
GLC-SX-MM
GLC-T
|
|
|
|
 |
 |
 |
 |
|
|
.
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . 
| |