 |
|
 |
|
| WS-C3560-24TS-S Cisco Catalyst WS-C3560-24TS-S New |
|
|
|
 |
 |
 |
| |
 |
 |
Condition: New
The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office
environments, combining 10/100 configurations for maximum productivity and investment protection while
enabling the deployment of new applications such as IP telephony, wireless access, video surveillance,
building management systems, and remote video kiosks.
| Regular Price: | $ 2,995.00 / Each |  | | Sale Price: | $ 1,750.00 / Each | | You Save: | $ 1,245.00 / Each |
|
 |
|
|
|
 |
 |
 |
|
|
|
|
|
|
|
|
Customers can deploy networkwide intelligent services-such as advanced quality of service (QoS), rate limiting,
access control lists (ACLs), multicast management, and high-performance IP routing-while maintaining the
simplicity of traditional LAN switching.
Main Features
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-C3560-24TS-S
Manufacturer Website Address: www.cisco.com
Product Type: Ethernet Switch
Interfaces/Ports: 24 x 10/100Base-TX LAN
Interfaces/Ports Details: 24 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/MDI/MDI-X LAN, 1 x RJ-45 Console Management
Expansion Slots: 2 x Expansion Slot
Slot Details: 2 x SFP (mini-GBIC)
Form Factor: 1U Rack-mountable, Desktop, Wall-mountable
Dimensions: 1.73" Height x 17.5" Width x 11.8" Depth
Weight: 8.5 lb
Standard Warranty: Lifetime Limited
Standard Warranty: Lifetime Limited
Be the first to leave a comment for this product.
General Information
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-C3560-24TS-S
Manufacturer Website Address: www.cisco.com
Product Line: Catalyst
Product Series: 3560
Product Type: Ethernet Switch
Interfaces/Ports
Interfaces/Ports: 24 x 10/100Base-TX LAN
Interfaces/Ports Details: 24 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/MDI/MDI-X LAN, 1 x RJ-45 Console Management
Media & Performance
Connectivity Media: Category 3 UTP 10Base-T, Category 4 UTP 10Base-T, Category 5 UTP 10/100Base-TX
Data Transfer Rate: 10Mbps Ethernet Half/Full-duplex, 100Mbps Fast Ethernet Half/Full-duplex
Performance: 32Gbps Forwarding Bandwidth
I/O Expansions
Expansion Slots: 2 x Expansion Slot
Slot Details: 2 x SFP (mini-GBIC)
Network & Communication
Flow Control: IEEE 802.3x (Full-duplex)
Layer Support: 2 Switching, 3 Routing, 4
Address Table: 12K MAC Addresses Maximum
Management & Protocols
Management:
Telnet
policy management
SNMPv1, SNMPv2c, and SNMPv3
Command-line interface (CLI)
Resource Manager Essentials
Web-based management
Cisco Network Assistant Software
Four thousand VLAN IDs are supported
CiscoWorks network-management software
Management console port: RJ-45-to-DB-9 cable for PC connections
Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN.
Up to 1024 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported
Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events).
Cisco Express Setup simplifies initial configuration of a switch through a Web browser, eliminating the need for more complex terminal emulation programs and CLI knowledge.
VLAN trunks can be created from any port, using either standards-based 802.1Q tagging or the Cisco Inter-Switch Link (ISL) VLAN architecture.
Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.
Protocols: RIP, LACP, DHCP, DTP, PAgP, RSTP, HSRP, UDLD, RIP v1.0, RIP v2.0, OSPF, IGRP, EIGRP, BGP v4, PIM-SM, PIM-DM, DVMRP, STP, MSTP, ARP, TCP/IP, TACACS+, RADIUS, TFTP, NTP, SSH, SNMP, Telnet
Security:
Secure Shell (SSH) Protocol Version 2
Two thousand access control entries (ACEs) are supported
TACACS+ and RADIUS authentication enable centralized control of the switch
IEEE 802.1x allows dynamic, port-based security, providing user authentication
Port security secures the access to an access or trunk port based on MAC address
Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.
Cisco Network Assistant software security wizards ease the deployment of security features
Port-based ACLs (PACLs) for Layer 2 interfaces allow application of security policies on individual switch ports.
Cisco security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data flows from being bridged within VLANs.
Spanning-Tree Root Guard (STRG) prevents edge devices not in the network administrator's control from becoming Spanning Tree Protocol root nodes.
Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco Secure Intrusion Detection System(IDS) to take action when an intruder is detected.
Operating System:
Standard Multilayer Software Image (SMI) installed
Memory
Memory: 128MB DRAM
Controls/Indicators
Status Indicators: Per-port status LEDs:
Link integrity
Disabled
Activity
Speed
Full-duplex indications
System-status LEDs:
System
RPS
Link status
Link duplex
Link speed
Reliability
MTBF: 326100 Hour(s)
Power Description
Input Voltage: 100 V AC to 240 V AC Auto-ranging , 12 V DC
Input Current: 0.8 Ato 1.3 A, 5 A @ 12V DC
Frequency: 50 Hz or 60 Hz
Power Consumption: 45 W Maximum
Power Supply: 675W RPS Connector Internal
Environmental Conditions
Temperature: 0 C (32 F) to 45 C (113 F) Operating, -25 C (-13 F) to 70 C (158 F) Storage
Humidity: 10% to 85% Non-condensing Relative Humidity Operating
Altitude: 10000 ft Operating, 15000 ft Storage
Physical Characteristics
Form Factor: 1U Rack-mountable, Desktop, Wall-mountable
Dimensions: 1.73" Height x 17.5" Width x 11.8" Depth
Weight: 8.5 lb
Miscellaneous
Package Contents:
Catalyst 3560 Switch
Regulatory Compliance and Safety Information for the Catalyst 3560 Switch
Product registration card
AC power cord (AC-powered switches)
One RJ-45-to-DB-9 adapter cable
Mounting kit containing:
Four rubber feet for mounting the switch on a table
Two 19-inch rack-mounting brackets (also used for wall mounting)
Six Phillips flat-head screws for attaching the brackets to the switch
Four Phillips machine screws for attaching the brackets to a rack
One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
One redundant power system (RPS) connector cover (for wall mounting)
Two Phillips pan-head screws (for attaching the RPS cover)
Four Phillips truss-head screws (for wall-mounting brackets)
Additional Information:
Advanced IP routing
Configurable up to 11,000 unicast routes
Configurable up to 1000 IGMP groups and multicast routes
Acoustic Noise: 42dBa
DC Input Voltages (RPS Input): 10.5A
Power Rating: 0.075 kVA
Telco: Common Language Equipment Identifier (CLEI) code
Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (Jumbo frames), for bridging on Gigabit Ethernet ports, and up to 1546 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on 10/100 ports.
|
|
|
|
|
Maximum order Qty: 10
|
|
|
| YOU MAY NEED FOLLOWING PHONES FOR THE CISCO SWITCHES - GLC-FE-100FX
GLC-GE-100FX
GLC-LH-SM
GLC-SX-MM
GLC-T
|
|
|
|
 |
|
|
|
|
|
.
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . 
| |
Teleman Systems
491 Aldo Ave
Santa Clara, CA 95050
United States
Ph: 877-573-7771
e-mail: sales@telemansys.com
|
|
| Sitemap |
| |
|
 |